Today, I write about how I built an 8 channel wireless IEM system in a 4U form factor. The Past A couple of years ago, I bought a Sennheiser ew IEM G4 to be used in my Sound Devices Scorpio; my microphone, MIC, rack. With this, I could either receive a single wireless stereo mixContinue reading “A Dante/AES50 enabled 4U mixer rack for 8 wireless IEM channels”
Tag Archives: Scorpio
Latency Test with a Wireless Microphone, through a DP48 Personal Mixer and a Wireless IEM
Now that we built our IEM rack it was time to bring it to a real life test and measure its latency. Would it really be usable? The short answer is definitely yes! But it certinaly is not free of any latency. We measured a net latency of roughly 2062.500us. Read on if you wantContinue reading “Latency Test with a Wireless Microphone, through a DP48 Personal Mixer and a Wireless IEM”
Sound Devices 8-series Firmware v8.90 bug leads to disabled Channel Input after Recording
The other day I finally got my new sound Devices A20 Mini and connected it to my Scorpio via A10-RX / SL-2. After a quick test recording I came across a small firmware error (that actually has nothing to do with the A20). [Update 2020-05-21] Sound Devices confirmed to me that they are aware ofContinue reading “Sound Devices 8-series Firmware v8.90 bug leads to disabled Channel Input after Recording”
Sound Devices Scorpio with Hirose 10-pin Output
The Sound Devices Scorpio comes with 2 Hirose 10-pin outputs that – according to the block diagram – can be configured for L, R or bus B1 to B10. Sound Devices sells this cable under the product name XL-10. However, this item is no longer sold. And my supplier in Switzerland told me, he wouldContinue reading “Sound Devices Scorpio with Hirose 10-pin Output”
appclusive 